How To Choose A Drawer Slide

When choosing the right drawer slide there are a variety of things that you simply got to take into consideration. Read the subsequent guide below to work out which drawer slide is that best suited for your requirement

Load Rating

The load rating is a particularly important factor to think about when selecting a drawer slide. At Eurofit Direct we categorize our slides into Light, Medium, and Heavy Duty load evaluations. Our selection of slides ranges from 10kg slides suitable for many kitchen drawers, up to 250kg heavy-duty slides used for drawers storing tools and industrial components.

Slide Length

Users should contemplate their ideal slide length and augmentation while picking cabinet slides. Because drawer slides can last for years it’s worth making an investment within the exact configuration you’d be presumably to enjoy over an extended period. Nothing is more frustrating than having shorter drawer travel than you would like or having your nice granite countertop keep you from having the ability to access the things inside your kitchen drawers.

In general, most people buy slides that are home in size from 10″ to 28″. Additionally, at OVIS, we provide a spread of heavy duty drawer slides that are 30”, 36”, 40”, 42”, 48”, and even up to 60” long.

For side-mount and center-mount slides, typically measure the space from the front fringe of the cupboard to the within the face of the cupboard then subtract 1″. For under-mount slides, measure the drawer length. Slides must be an equivalent length as a drawer to figure properly.

Center-Mounted Drawer Slides

Center-mounted drawer slides are characterized by the way during which they’re mounted. they’re mounted directly below within the center of drawers. If you remove a drawer from the piece of furniture during which it’s installed, you’ll find the center-mounted drawer slides within the center below it. they’re referred to as “center-mounted drawer slides” because they’re mounted within the center of drawers.

Under-Mounted Drawer Slides

Alongside focus mounted cabinet slides, there are under-mounted cabinet slides. Under-mounted drawer slides are found on the edges. Like center-mounted drawer slides, they’re found below the respective drawers with which they’re used. The difference is that center-mounted drawer slides are located within the center of the drawers, whereas under-mounted drawer slides are located on the edges. Both types are mounted below the drawers, but only under-mounted drawer slides are found on the edges.

Roller Slides

Roller slides are typically composed of two mated, epoxy-coated metal profiles—one which attaches to the drawer and one which attaches to the cupboard frame—and nylon wheels—which allow the profiles to maneuver smoothly and quietly along with one another. Compared to wooden slides, these slides are more conspicuous as they attach to the edges of the drawer and can, therefore, need a mask or an extended drawer front lip to hide the hardware, if desired. Available in both side mount and bottom mount—also sometimes called European bottom mount—models, roller slides are typically used for more lightweight applications (~75 lbs.).

Drawer Runner Types

Before deciding anything, you would like to understand what sort of Drawer runners you would like. There are 3 main types; side-mount runners are the foremost popular, and either attach to the side of the drawers or slot into a groove. These are referred to as groove Drawer runners. There also are bottom-fix Drawer runners, either as a center-mount runner (one single drawer runner mounted under the center of the drawer) or with two separate drawer runners mounted evenly under the drawer.

How Does One Measure Drawer Runners?

Drawer runners are measured by the longest dimension of the fully closed side, then should snuggly fit within the length of the drawer.

Normally, you’ll be ready to remove your previous drawer runners (assuming they’re not warped or bent) and obtain the measurement from these. However, it’s always recommended to live the drawer unit just in case.

How To Measure:

  • Remove a drawer from the unit
  • Flip the wrong way up and measure across rock bottom (excluding drawer front)
  • If your measurements are accurate, you’ll buy full extension drawer runners that measure an equivalent because the interior unit measurement
  • Then again, permit 10mm leeway on cabinet sprinter length
  • Check the within of the drawer unit to ascertain if there’s anything that will obstruct installation of the runners
  • Always measure twice, and buy once!

Drawer Slides – Metal, Plastic

In the early 1980s, the primary drawer slides with ball bearings were introduced. This has completely changed the furniture industry. Previously, furniture was equipped with something more like primitive guidance – usually made from wood or plastic. Throughout the long term, furniture sprinters’ innovation has advanced. ranging from H17mm drawer slides, which are predisposed to economical furniture, and people which will not support heavy loads, roller runners – which, in fact, can’t be classified as a needle bearing slides, but they’re equipped with a system of lubricating rollers that resemble other guides, to 27mm, 30mm, 35mm high drawer slides, which are far more durable and may be universally used for various sorts of kitchen, office, room, and even metal furniture.

Leave a Reply