How to Select a Best Bathroom Sink

Online bathroom vanity store New Bathroom Style will tell you about the mold in the bathroom: why does it appear? The fungus in the bathroom seems primarily on the walls and ceiling. The reasons for this are a whole range of factors, of which the following should be noted: the level of humidity in the room is over 60%, which is considered high and arises as a result of frequent water procedures and washing, as well as storage of things in the bathroom (wet towels and linen, if you dry them here);

  • insufficient ventilation – may be associated with improper operation of ventilation systems (for example, rare cleaning or initially erroneous design) and with sealed doors that are constantly closed;
  • too high a temperature (over 24 degrees Celsius) – in combination with humidity, creates favorable conditions for the rapid multiplication of fungal spores and often interferes with independently removing mold in the bathroom completely and forever;
  • lack of natural light – sunlight can destroy mold spores, but since most bathrooms have no windows, this room is devoid of such a means of protecting against fungus;
  • damaged surfaces of your luxury bathroom vanities and finishing materials – chips in the paint, poorly processed tile joints, and the like lead to moisture settling in the cracks, creating a suitable environment for the development of fungus.

What is the danger of fungus in the bathroom for a person?

In addition to the unaesthetic appearance of walls and ceilings, the most visible sign of mold, the fungus, can lead to serious health problems.

Some of the most common severe consequences include:

  • respiratory tract diseases (bronchial asthma, chronic bronchitis, pneumonia, and other similar diseases);
  • damage to the mucous membranes and other problems that lead to nosebleeds, gastrointestinal upset, and similar painful manifestations (most often occur after prolonged and constant exposure to mold spores).

Ignoring traces of fungus in the house can lead to chronic diseases, which will be very difficult or even impossible to cure. The sooner you worry about removing mold in the bathroom, the less harm it will do to you: take action at the first sign of its occurrence.

Control methods: how to remove the fungus in the bathroom forever

What to do if the fungus has already appeared in the bathroom? What techniques and means can be used to remove it without harming the repair? Let’s take a look at the most effective ways to self-control mold in bathrooms on your unique bathroom vanities.

Specialized household chemicals and improvised means

For the treatment of moldy areas in the bathroom, household chemicals are suitable and proven folk methods.

How to remove the fungus in the bathroom using available tools, and which substances are most effective?

  1. Vinegar. Apply table vinegar with a spray bottle to fungal stains, leave for a couple of hours, remove molds with a brush or hard sponge, rinse the treated surfaces thoroughly with water and ventilate the area well.
  2. Hydrogen peroxide. The mechanism of using peroxide as an antifungal agent is similar to using vinegar, but this substance is only suitable for light surfaces as it can discolor the coating.
  3. Baking soda. Dissolve 1 tsp. Soda in 300 ml of water, apply the solution to the affected areas, leave for a few minutes, and then rinse with a sponge. This composition is suitable for all coatings.
  4. Ammonium alcohol. The product is suitable for tiles and glass partitions in shower cabins. Alcohol is diluted with water in a 1: 1 ratio, applied with a spray gun to the foci of the fungus, then left for several hours, after which the treated area is thoroughly washed with water.

Mechanical method

The most difficult, financially, and energy-consuming method is the mechanical removal of the fungus in the bathroom. It is a full-fledged repair with a change of affected coatings. This is an extreme measure for the most “neglected” cases of deep penetration of mold into the finish, and it is worth resorting to it only if other methods have not helped.

  1. First, the affected areas must be thoroughly wetted with water: thanks to this, fungal spores will not get into the air and will not be able to settle again on other areas of the coating.
  2. Clean out the mold with any tool that is suitable for this: a drill grinder is effective for plaster and paint, a metal scraper or brush for wallpaper and tiles, a router and sandpaper for wood and concrete.
  3. Remove as much of the coating as possible around the affected area (in the case of paint, concrete, plaster, and wood, deeper layers will need to be removed).
  4. Cover the entire treated surface with a professional antifungal agent, also covering the area around this area.
  5. After the anti-mold agent is arid, reapply it. Repeat the procedure again after the new layer has dried.
  6. Renew the finish as needed (for example, cover the treated areas with a new coat of paint, plaster, or wallpaper).

 Preventing fungus in the bathroom

The main reason for the appearance of mold in the bathroom is too humid air. Therefore, to prevent it, the humidity in this room should be normalized.

The following measures will help you with this:

  • regular ventilation – leave the bathroom door open as often as possible;
  • installation of electric heating devices – use an electrically heated towel rail, as well as a system of underfloor heating;
  • Preventing the accumulation of water on surfaces – wipe dry countertops, furniture and bathroom and shower walls after each water treatment;

Wipe down all bathroom surfaces (shower walls, shelves, and countertops) after each use to prevent mold growth

  • regular use of an air purifier – this device destroys mold spores. Therefore it is well suited for preventing fungus in the bathroom. Still, it is worth protecting it from contact with water during use.

These simple guidelines will help you eliminate the fungus on the walls and floors and even clean the stretch ceiling from it – quickly, independently, and effectively.

Leave a Reply